Editorial Note: This article is written with editorial review and topic relevance in mind.
Hi folks, can anybody tell me how far below the chassis rails the bottom of a pinto sump is on a standard build? Quick look on here and i realise its wrong!! Click the register link above to.
Obituary Jimmie Donnell Scott of Wake Village, Texas Haynes
Wishbone material chassis hi this is my first post so please be gentle! Welcome to the haynes forums. Pedal construction bodywork and interior thread tools display modes # 1 4th january 2012, 09:18 am toyotus junior member
You may have to register before you can post:
What size fuel and brake lines should i be using as that is the next thing i need to buy. If this is your first visit, be sure to check out the faq by clicking the link above. What i need is a dimension that would represent the driveshaft centerline both in height from underside of the chassis. I've gone and fully welded in my steering rack mount as per my first edition book.
Suspension brackets chassis thanks gents,i did not add a spacer and that will probably fix it. I measured the placement of the front lower bracket,leveled it and then ran a bar through it for the rear. I am fitting a 2.0 dohc and mt 75 and intend to use the position of the centre of the. The distance from the top of the bottom rails to top of rack mount is 80mm,.
I am well under way with my mock up build but am unsure of position of diff unit.
